Frencken F400 High Tack Extreme White 290ml
A High Tack assembly adhesive for bonding and mounting on many substrates and materials, even (slightly) damp, in various (weather) conditions.
| Number of | Price per piece |
|---|---|
|
1x
|
€5.45 |
|
12x
|
€4.95 |
Order before 23:59, delivered next working day
Application
Before applying Frencken FS125 Fast Tack, ensure the substrate is clean, dry, and free from dust and grease. You can clean the surface using cleaning wipes. Any remaining dust can be easily swept up with an dust brush. Apply the Frencken F400 High Tack Xtreme using a caulking gun in beads or dots of approximately 15 cm on one of the bonding surfaces. Note: For bonding panels, it is recommended to apply a bead or dot at the edges, corners, and ends of the panel. Secure the material and tap it firmly with a rubber hammer. After 1 to 2 days, the bonded parts can be fully loaded.
Uncured remnants of Frencken F400 High Tack Xtreme can be removed with Frencken Surface Activator. Cured remnants can only be removed mechanically.
Advantages
- Extremely high initial adhesive strength of at least 400 kg/m².
- Very quick to handle and fast strength development in a thin adhesive layer and on porous surfaces
- Fast curing
- Easy to process with the standard supplied triangular nozzle
- Remains permanently elastic after curing and is highly durable
- Virtually odorless
- Excellent resistance to UV rays and other weathering factors
- Excellent adhesion to most substrates, even slightly damp ones
- Can be painted over with water-based paints
- No staining (edge contamination) on porous substrates such as marble, granite, and other natural stones
| detail.eanLabel | 8712575101298 |
|---|---|
| Brand: | Frencken |
| Product Type: | Lijmkit |
Frencken F400 High Tack Extreme White 290ml
A High Tack assembly adhesive for bonding and mounting on many substrates and materials, even (slightly) damp, in various (weather) conditions. Suitable for bonding extreme loads without support. F400 High Tack adhesive has an initial adhesion of up to 400 kg/m² and is hand-tight after only 30 minutes. After full curing, it becomes even stronger. UV resistant, super strong, solvent-free, and weather-resistant.
This High Tack Xtreme assembly adhesive is suitable for many materials and substrates such as wood, PVC, metals, plastics, stone, concrete, bitumen, copper, and brass.
Combine with
Recently viewed products
A High Tack assembly adhesive for bonding and mounting on many substrates and materials, even (slightly) damp, in various (weather) conditions.